• Show Sidebar

There are 1324 products.

Active filters

Pegatinas Bicicleta Horquilla Fox 32 Step Cast Año 2020 - Star Sam

Stickers compatible with fork bike Fox 32 Step Cast 2020

Brands: Fox
€17.00
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 32 Factory SC Step cast - Star Sam

Stickers compatible with fork bike Fox 32 Factory SC Step cast fork 2017

Brands: Fox
€13.00
Available colours:  18

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 34 Heritage degradado - Star Sam

Pegatinas horquilla bici Fox 34 Heritage Collection 2021 degradado

Brands: Fox
€20.00
Available colours:  7

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Amortiguador Rock Shox Monarch RC3 - Star Sam

Stickers compatible with Rock Shox Monarch RC3 shock absorbers

Brands: Rock Shox
€13.50
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 36 Heritage degradado - Star Sam

Stickers compatible with fork bike Fox 36 Heritage Collection 2021 degraded

Brands: Fox
€18.00
Available colours:  7

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 40 Heritage degradado - Star Sam

Stickers compatible with fork bike Fox 40 Heritage Collection 2021 degraded

Brands: Fox
€20.00
Available colours:  7

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Casco De Bicicleta Met Troquelado - Star Sam

Met bike helmet compatible stickers

Brands: Met
€9.00
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Llantas De Bicicleta Enve M70 MTB 27 - Star Sam

Stickers compatible with Enve M70 MTB 27,5" MTB rims

Brands: Enve
€26.00
Available colours:  15

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Llantas Bicicleta Roval DH MTB 27 - Star Sam

Stickers compatible with Roval DH MTB 27,5" bike rim

Brands: Roval
€26.00
Available colours:  15

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

DT Swiss 420SL MTB 29 Rims Bike Sticker Choose Colour - Star Sam

DT SWISS 420SL MTB 29" wheel rim bike compatible stickers

Brands: DT Swiss
€26.00
Available colours:  8

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Bontrager LineComp30 MTB 29 Bike Sticker Choose Colour - Star Sam

Bontrager LineComp30 MTB 29" wheel rim bike compatible stickers

Brands: Bontrager
€25.00
Available colours:  15

How to use         

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Fulcrum MTB 29 Bike Sticker Choose Your Colour - Star Sam

Fulcrum MTB 29" wheel rim bike compatible stickers

Brands: Fulcrum
€27.50
Available colours:  15

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Bontrager Aeolus Pro5 50mm Bike Sticker Choose Colour - Star Sam

Bontrager Aeolus Pro5 50mm road wheel rim bike compatible stickers

Brands: Bontrager
€26.00
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Mavic Cosmic SLR 40mm Rims Bike Sticker Choose Colour - Star Sam

Mavic Cosmic SLR 40mm wheel rim road bike compatible stickers mod-2

Brands: Mavic
€31.00
Available colours:  22

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Orbea Occam 2021 Frame Bike Sticker Choose Your Colour - Star Sam

Orbea Occam 2021 frame bike compatible stickers

Brands: Orbea
€30.50
Available colours:  21

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Boxxer Select Fork Bike Sticker 2020 - Star Sam

Rock Shox Boxxer Select 2020 fork bike compatible stickers

Brands: Rock Shox
€21.50
Available colours:  17

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Boxxer Select Die-Cutting Fork Bike Sticker - Star Sam

Rock Shox Boxxer Select 2020 die cut fork bike compatible stickers

Brands: Rock Shox
€18.00
Available colours:  18

How to use                 

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Trek Factory Racing RSL Degraded Frame Bike Sticker - Star Sam

Trek Factory Racing RSL Sram frame bike compatible stickers

Brands: Trek
€21.50
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Cube X6 Degraded Bike Sticker Choose Your Colour - Star Sam

Cube x6 frame bike compatible stickers gradient

Brands: Cube
€18.00
Available colours:  10

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Sid Select Plus Bike Sticker Year 2020 - Star Sam

Rock Shox Sid Select + 2020 fork bike compatible stickers

Brands: Rock Shox
€20.00
Available colours:  17

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Yari Ultimate Die-Cut Fork Bike Sticker  - Star Sam

Rock Shox Yari Ultimate 2020 die cut fork bike compatible stickers

Brands: Rock Shox
€17.00
Available colours:  18

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Zeb Bike Sticker Choose Colour Year 2021 - Star Sam

Rock Shox Zeb 2021 fork bike compatible stickers

Brands: Rock Shox
€21.50
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Zeb Select Fork Bike Sticker Year 2021 - Star Sam

Rock Shox Zeb Select 2021 fork bike compatible stickers

Brands: Rock Shox
€18.00
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Fox 36 Rhythm Bike Sticker Choose Colour Year 2021 - Star Sam

Fox 36 Rhythm 2021 fork bike compatible stickers

Brands: Fox
€20.00
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Para Buje De Bicicleta Fulcrum Fondo Color - Star Sam

Stickers compatible with Fulcrum bike hubs

Brands: Fulcrum
€9.00
Available colours:  18

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera

Pegatinas Para Cuadro De Bicicleta Santa Cruz Modelo 1 - Star Sam

Stickers compatible with Santa Cruz bike frame mod-1

Brands: Santa Cruz
€20.00
Available colours:  14

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Cuadro Bicicleta Specialized Kenevo Modelo 1 - Star Sam

Stickers compatible with Specialized Kenevo bike frame mod-1

Brands: Specialized
€22.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera.

Pegatinas Cuadro Bicicleta Specialized S-works Modelo 4 - Star Sam

Stickers compatible with Specialized S-works bike frame mod-4

Brands: Specialized
€18.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 34 Performance Elite - Star Sam

Stickers compatible with fork bike Fox 34 Performance Elite 2021

Brands: Fox
€20.00
Available colours:  17

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Fox 40 Performance Elite - Star Sam

Stickers compatible with fork bike Fox 40 Performance Elite 2021

Brands: Fox
€20.00
Available colours:  18

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Cuadro Bicicleta Specialized Modelo 4 - Star Sam

Stickers compatible with Specialized bike frame mod-4

Brands: Specialized
€18.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test