Mercury Fourstroke EFI Boots Stickers Red And White - Star Sam

Outboard motor compatible sticker kit Mercury Fourstroke EFI Boat compatible stickers Navigation Boats

€49.50

€66.00

Save 25%

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out

Quantity

STAR SAM® Outboard motor sticker kit Mercury Fourstroke EFI Boat stickers Navigation Boats

Vinyls of the highest quality, ORACAL vinyls. Printing is done on ORACAL 3651, polymeric vinyl. Top quality 3M adhesive.
The laminate of the adhesives is made with ORAGUARD 210, this laminate protects the adhesive from ultraviolet rays thus avoiding loss of color with exposure to the sun, this laminate is ultra-resistant in terms of scratches and rubbing.
Our printing machines are the most advanced on the market and they manage to get the highest quality in terms of colorimetry.

How to use

Pre-clean the surface where the adhesive is to be placed. Use soapy water and then clean glass or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once in place, apply firm and even pressure to the adhesive from the center out

- We use Oracal 2651 polymeric vinyl.

- We use Oraguard 210 laminate

- Our inks are Roland Truevis Ink eco solvent inks.

- We use 3M Adhesive

Quantity